Last Update:
You can trust our selection for Bearing Puller Reviews. Because We have worked hard studying and analyzing 36334 reviews for Bearing Puller and rating them. It was a difficult job to list only ten products for Bearing Puller where thousands of them available online. I hope it will help you to take final decision for Best Bearing Puller.
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
| No | Product | Score | Action |
|---|---|---|---|
| 1 | ATP 14PCS Bearing Separator Puller Set 2" and 3" Splitters Remove Bearings Kit | 9.6 | Check it on Amazon |
| 2 | Bearing Puller Set, 5-Ton-Capacity Bearing Separator | 9.6 | Check it on Amazon |
| 3 | YOTOO Bearing Pullers Set 5 Ton Capacity | 9.6 | Check it on Amazon |
| 4 | ABN 3-Jaw Gear Puller Set – 3in | 9.4 | Check it on Amazon |
| 5 | Amerbm Two Jaw Bearing Puller Remover 30mm - 90mm Adjustable Puller Tool for Special Design for Narrow Spaces Removal Small Bearing or Gears | 9 | Check it on Amazon |
| 6 | DURATECH 3-Inch 3-Jaw Gear Puller | 9 | Check it on Amazon |
| 7 | ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS | 8.8 | Check it on Amazon |
| 8 | 12pcs 5 ton Capacity 2" and 3" Bearing Separator Puller Set Splitters Bearings Remover Kit | 8.6 | Check it on Amazon |
| 9 | Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit | 8.2 | Check it on Amazon |
| 10 | Two Jaw Pilot Bearing Gear Puller | 8.2 | Check it on Amazon |
Comparison Chart for Best Bearing Puller
36334 reviews were considered when writing our recommendations for the Bearing Puller in this article.
Table Of Content:
- ATP 14PCS Bearing Separator Puller Set 2" and 3" Splitters Remove Bearings Kit
- Bearing Puller Set, 5-Ton-Capacity Bearing Separator, Wheel Hub Axle Puller Set, Pinion Bearing Removal...
- YOTOO Bearing Pullers Set 5 Ton Capacity, Bearing Separator Kit
- ABN 3-Jaw Gear Puller Set 3in, 4in, and 6in Removal Tool Kit for Slide Gears, Pulley, and Flywheel
- Amerbm Two Jaw Bearing Puller Remover 30mm 90mm Adjustable Puller Tool for Special Design for Narrow Spaces...
- DURATECH 3-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled...
- ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS
- 12pcs 5 ton Capacity 2" and 3" Bearing Separator Puller Set Splitters Bearings Remover Kit
- Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert...
- Two Jaw Pilot Bearing Gear Puller, Bearing Gear Remover Tool Carbon Steel Adjustable Pump Pulley Remover...
1. ATP 14PCS Bearing Separator Puller Set 2″ and 3″ Splitters Remove Bearings Kit
- Removes gears, pulleys, bearings, steering wheels, + more
- 2 Bearing separators ranging in size for sizes 9/32″ to 3″ in diameter
- 2″ and 3″ size separators, 5″ puller crossbar, 6-1/4″ lead screw
- Forged, heat treated steel attachments, see detailed part list below in Product Details
- Evenly applies pressure to smoothly separate bearings and remove gears without damage
2. Bearing Puller Set
- EASY OPERATION: Includes everything you need for efficient replacement of small and large wheel bearings on front and rear wheel hubs, pinions, and axle drive shafts on most vehicles.
- UNIVERSAL COMPATIBILITY: Includes heavy-duty, drop-forged 2” & 3” bar-type bearing splitters and 4” & 5” long hex push-puller legs so you can safely remove large or small bearings on front and rear wheel hub axle shafts without the hassle.
- HEAVY-DUTY DURABILITY: Built with rugged drop-forged construction and heat-treated to withstand rigorous jobs, this bearing puller set is proven dependable for the long haul.
- PROTECTIVE CARRYING CASE: Includes a custom-made ABS tool case with precision-sized slots for each component.
- ALL-IN-ONE TOOL KIT: Includes 14-piece bar-type gear and axle bearing separator, 4-piece 4” (10cm), 4-piece 5” (12.
3. YOTOO Bearing Pullers Set 5 Ton Capacity
- HEAVY DUTY BEARING PULLERS: Made of rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool.
- COMPLETE SET: YOTOO bearing separator set comes with 2″&3″ bearing splitters,four sets of hex push puller legs and a 5 inch bar type puller head with forcing screw, giving the user options to deal with various pulling jobs.
- VARIOUS PULLING JOBS: YOTOO pulling kit features a bar puller and legs that are perfect solutions to complete pulling jobs safely and successfully.
- WIDELY USE: This bearing puller kit can be used separately or in combination with other pullers and tools, making this tool suitable for beginners or professionals.
- WARRANTY&SUPPORT: ONE YEAR WARRANTY. If any problems, please feel free to contact us.
4. ABN 3-Jaw Gear Puller Set – 3in
- Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears.
- Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
- Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths.
- Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
- Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal.
5. Amerbm Two Jaw Bearing Puller Remover 30mm – 90mm Adjustable Puller Tool for Special Design for Narrow Spaces Removal Small Bearing or Gears
- FUNCTION 🚗: This 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble.
- APPLICABLE 🚗: Suitable for items 30mm 90mm in diameter. (applicable bearing dimension)
- MATERIAL 🚗: Made of #45 carbon steel, heavy-duty structure use oxidation treatment for corrosion resistance.
- EEASY TO USE 🚗: Use the two jaws to catch the bearing; Rotate the mandrel with the thread; Slowly pull out the bearing of the shaft.
- Amerbm’s Guarantee 🚗: Give you perfect user experience, whether you are master or DIY novice.
6. DURATECH 3-Inch 3-Jaw Gear Puller
- Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability.
- Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection.
- Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside.
- Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears.
- Jaw Spread: 3in, Jaw Reach: 3-9/16in, Puller: 3T.
7. ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS
- Bearing Extractor Collets With Internal Capacity From 3/8″ (10mm) To 1-1/4″ (32mm)
- One Slide Hammer Assemble & Clamp
- Open Clamps By Turning Handle Clockwise To Snug Against The Bearing
- For Pulling Out Evenly Without Damage The Parts
- Fully Chromed Carbon Steel Slide Hammer, 15″ (382mm) Overall Length
8. 12pcs 5 ton Capacity 2″ and 3″ Bearing Separator Puller Set Splitters Bearings Remover Kit
- Practical: Use the Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
- Versatile: For a wide variety of pulling jobs; Can remove bearings from a shaft, split bearings, and separate flywheels; Up to 5-Ton (4.
- Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity; Black oxide finish for corrosion resistance.
- Easy Storage: Heavy-duty 15” x 9.
- Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.
9. Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit
- DURABILITY, this bearing puller set features high hardness and toughness for optimal performance.
- WIDE COMPATIBILITY, comes with various size and type of collets, Blind / Internal /Bearing Puller, this tool set boasts wide compatibility.
- EASY TO USE, this kit is easy to use, just insert the collect and expand it to fit the hole
- PERFECT FOR PROFESSIONAL AND DIY USE, ideal for pulling jobs and will not damage parts in using, perfect for professional and DIY use.
- PORTABILITY, comes with a durable storage case, you can neatly collect the tools and easily bring it to anywhere you like.
10. Two Jaw Pilot Bearing Gear Puller
- Adjustable & Fit for Different Gears and Bearings】The puller can be bilateral rotation, enable stretching size and working space.
- Widely Application to be Used】These Two Jaw Gear Pullers are ideal for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc.
- Made of High Quality Carbon Steel Material】These Two Jaw Pilot Bearing Gear Pullers are made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable.
- Jaw Bearing Gear Puller & Service Guaranteed】Material: Carbon steel.
- Easy to Use】Comes with hexagonal screw and thread for fastening, non-silp and high strength.
How To Choose The Best Bearing PullerDoes the thought of finding a great Bearing Puller stress you out? Has your mind been juggling between choices when it comes to buying Bearing Puller in general, specifically regarding which model to choose?If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Bearing Puller for themselves. We understand the stress associated with the buying process!Since you’re here, you are obviously curious about Bearing Puller. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.But that’s not always easy, right? That's why we've taken time to compile a list of the best Bearing Puller in today's market, on your behalf, so that there will be no more worries for you.How did we come up with the list, you ask? How did we create this buying guide?
- First, our algorithms collected as much information available about these products from trusted sources.
- We employed both Artificial Intelligence and large data volume to validate all collected information.
- Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Bearing Puller currently on the market!
- Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
- Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Bearing Puller based on that.
- Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
- Customer Ratings: The hundreds of customers using the Bearing Puller before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
- Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Bearing Puller they used.
- Seller Rank: Now, this is interesting! You don’t just need a good Bearing Puller, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
- Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Bearing Puller before putting them on the list.
- Durability: Durability and reliability go hand to hand. A robust and durable Bearing Puller will serve you for months and years to come.
- Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Bearing Puller if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
- Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Bearing Puller on the market, the products that got mostly negative ratings get filtered and discarded.