Last Update:
You can trust our selection for Sbc Iron Heads Reviews. Because We have worked hard studying and analyzing 40345 reviews for Sbc Iron Heads and rating them. It was a difficult job to list only ten products for Sbc Iron Heads where thousands of them available online. I hope it will help you to take final decision for Best Sbc Iron Heads.
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
No | Product | Score | Action |
---|---|---|---|
1 | DNA Motoring CYLH-SBC-350 Aluminum Bare Cylinder Head Compatible with SBC Engines 302 | 9.6 | Check it on Amazon |
2 | Mostbest Head Stud Replacement Kit for SBC Cylinder Head Stud Set # 1525-Stud/ 279.1001 | 9.4 | Check it on Amazon |
3 | Acouto Cylinder Head Stud Kit | 9.4 | Check it on Amazon |
4 | SBC Small Block Chevy V8 Cylinder Head Bolt Set | 9.2 | Check it on Amazon |
5 | Cylinder Head Bolt Set Black Compatible with SB Chevy 350 383 400 SBC with washers | 9.2 | Check it on Amazon |
6 | JEGS Small Block Chevy Vortec Cast Iron Cylinder Head - Made In USA - 1 Per Package - Straight Spark Plug - 1.94” Intake / 1.5” Exhaust Valve - 170cc Intake Ports - .475” Max Lift | 9.2 | Check it on Amazon |
7 | 2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc | 8.4 | Check it on Amazon |
8 | Flotek Cylinder Head, Assembled | 8.4 | Check it on Amazon |
9 | Cylinder Head Stud Kit for Chevrolet for Chevy Small Block SBC 350 265 267 283 302 305 307 327 Engines 134-4001 PCE279.1001 | 8.4 | Check it on Amazon |
10 | JEGS Small Block Chevy 1996-2002 Intake Manifold - For Use With Vortec Cast Iron Cylinder Heads - Non-EGR - Idle - 5500 RPM Power Range - Black Cast Aluminum - Square Bore Mounting Pad | 8.2 | Check it on Amazon |
Comparison Chart for Best Sbc Iron Heads
40345 reviews were considered when writing our recommendations for the Sbc Iron Heads in this article.
Table Of Content:
- DNA Motoring CYLH-SBC-350 Aluminum Bare Cylinder Head Compatible with SBC Engines 302, 327, 350, 383
- Mostbest Head Stud Replacement Kit for SBC Cylinder Head Stud Set # 1525-Stud/ 279.1001
- Acouto Cylinder Head Stud Kit,Chromoly Steel Head Stud Kit Replacement for Alum Or Iron Heads Fit for...
- SBC Small Block Chevy V8 Cylinder Head Bolt Set
- Cylinder Head Bolt Set Black Compatible with SB Chevy 350 383 400 SBC with washers
- JEGS Small Block Chevy Vortec Cast Iron Cylinder Head | Made In USA | 1 Per Package | Straight Spark Plug...
- 2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc...
- Flotek Cylinder Head, Assembled, 2.020/1.600 in Valves, 180 cc Intake, 64 cc Chamber, 1.460 in Springs...
- Cylinder Head Stud Kit for Chevrolet for Chevy Small Block SBC 350 265 267 283 302 305 307 327 Engines...
- JEGS Small Block Chevy 1996-2002 Intake Manifold | For Use With Vortec Cast Iron Cylinder Heads | Non-EGR...
1. DNA Motoring CYLH-SBC-350 Aluminum Bare Cylinder Head Compatible with SBC Engines 302
- REASONABLE DESIGN – High grade aluminum, bronze valve guides, hardened seats and advance port design for greater air flow.
- HIGH PERFORMANCE – The 200cc intake runner with a 68cc combustion chamber improves performance and retains stock compression on 1970 and earlier.
- DURABILITY & USEFUL – The premium aluminum material can bear high pressure and high temperature.
- PRECISE DIMENSION – Under through skillful casting process, the intake valve diameter is 2.
- FITMENT – Compatible with SBC engines such as 302, 327, 350, 383 and 400 small block chevy engines up to 1986.
2. Mostbest Head Stud Replacement Kit for SBC Cylinder Head Stud Set # 1525-Stud/ 279.1001
- This kit has 14 long studs, 4 medium length, and 16 short studs.
- This listing is for the sbc head stud kit.
- These head studs are made from aircraft quality 8740 high tensile strength chrome moly steel.
- Studs make head installation a lot easier as the studs align the head and hold the head gasket in place.
- They clamp much better since the stud is loosely threaded into the block and the clamping torque is generated at the stud-nut interface rather than the block-bolt interface.
3. Acouto Cylinder Head Stud Kit
- Perfect fitment】This listing is for sbc head stud kit.
- Wear resistance】Cylinder head fasteners are made from aircraft quality 8740 high tensile strength chromoly steel and cold‑forged to ensure molecular integrity, anti‑rust, wear resistance and lightweight.
- More consistent cylinder head torque loading】The best reason for using head studs versus conventional head bolts is that cylinder head studs simply provide better and more consistent cylinder head torque loading.
- Special technology】Cylinder Head Stud Kit,Centerless ground and heat treated before thread rolling, are designed to maximize reliability and strength.
- Note】As a reliable seller, we aim to provide 100% products and services, and hope you have a pleasant shopping experience in our store.
4. SBC Small Block Chevy V8 Cylinder Head Bolt Set
- OEM-quality Grade 8 cylinder head bolt set (does both heads)
- Replacing head bolts is cheap insurance to prevent downtime in the shop
- For use with cast iron cylinder heads (without washers)
- 120,000 PSI proof load, 130,000 PSI yield strength, 150,000 PSI tensile strength
- Threads are coated with sealant to save you time durng assembly
5. Cylinder Head Bolt Set Black Compatible with SB Chevy 350 383 400 SBC with washers
- High quality – Made of high quality metal, durable and sturdy.
- Material – 35CRMO
- Fitment – Compatible with 283 / 302 / 305 / 307 / 327 / 350 / 383 / 400
- They Are Rated – 170,000 Psi
- Fastener Material – Chromoly, Fastener Finish: Black oxide.
6. JEGS Small Block Chevy Vortec Cast Iron Cylinder Head - Made In USA - 1 Per Package - Straight Spark Plug - 1.94” Intake / 1.5” Exhaust Valve - 170cc Intake Ports - .475” Max Lift
- FITS ALL 1955-Present GM small blocks except LT1, LT4, and LS1-style engines
- UTILIZES FAST BURN COMBUSTION CHAMBERS and high-velocity intake and exhaust ports
- PERFORMS GREAT RIGHT OUT OF THE BOX and can be mildly ported and milled up to 0.040 inch
- REQUIRES A VORTEC-STYLE INTAKE MANIFOLD to complete installation
- SPECIFICATIONS: 1.
7. 2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc
- High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow
- This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
- Intake Valve Diameter: 2.020″ ; Exhaust Valve Diameter: 1.600″ ; Intake Port Volume: 200cc
- Combustion Chamber Volume: 68cc ; Intake Port: Square ; Exhaust Port: Square
- Lighter than Iron Heads. Each Head weighs 10.33kg ; 3-Angle Valve Seat ; Spark Plug Angle : Straight
8. Flotek Cylinder Head
- product type: auto part
- package quantity: 1
- made in united states
- package dimensions: 24.1″ (l) x 10.7″ (w) x 8.6″ (h)”
- Fit type: Universal Fit
9. Cylinder Head Stud Kit for Chevrolet for Chevy Small Block SBC 350 265 267 283 302 305 307 327 Engines 134-4001 PCE279.1001
- Fit for Chevy Small Block SBC 265 267 283 302 305 307 327 350 383 400 Head Studs
- Interchange Part Number:PCE279.1001,134-4001,2451-S
- Package Contents:14 x Long studs,4 x Medium length,16 x Short studs,34 x screws,34 x pads
- Please double confirm the fitment details and OEM number before purchasing
- No instruction included and professional installation recommended
10. JEGS Small Block Chevy 1996-2002 Intake Manifold - For Use With Vortec Cast Iron Cylinder Heads - Non-EGR - Idle – 5500 RPM Power Range - Black Cast Aluminum - Square Bore Mounting Pad
- IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake.
- DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more.
- FABRICATED FROM BLACK CAST ALUMINUM for weight savings, great looks, and improved performance
- FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002
- IDLE TO 5500 RPM POWER BAND for street or mild race applications
How To Choose The Best Sbc Iron HeadsDoes the thought of finding a great Sbc Iron Heads stress you out? Has your mind been juggling between choices when it comes to buying Sbc Iron Heads in general, specifically regarding which model to choose?If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Sbc Iron Heads for themselves. We understand the stress associated with the buying process!Since you’re here, you are obviously curious about Sbc Iron Heads. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.But that’s not always easy, right? That's why we've taken time to compile a list of the best Sbc Iron Heads in today's market, on your behalf, so that there will be no more worries for you.How did we come up with the list, you ask? How did we create this buying guide?
- First, our algorithms collected as much information available about these products from trusted sources.
- We employed both Artificial Intelligence and large data volume to validate all collected information.
- Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Sbc Iron Heads currently on the market!
- Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
- Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Sbc Iron Heads based on that.
- Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
- Customer Ratings: The hundreds of customers using the Sbc Iron Heads before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
- Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Sbc Iron Heads they used.
- Seller Rank: Now, this is interesting! You don’t just need a good Sbc Iron Heads, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
- Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Sbc Iron Heads before putting them on the list.
- Durability: Durability and reliability go hand to hand. A robust and durable Sbc Iron Heads will serve you for months and years to come.
- Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Sbc Iron Heads if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
- Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Sbc Iron Heads on the market, the products that got mostly negative ratings get filtered and discarded.