Top 10 Best Header Gasket For Leaky Headers Based On Customer Ratings

Last Update:

You can trust our selection for Header Gasket For Leaky Headers Reviews. Because We have worked hard studying and analyzing 42545 reviews for Header Gasket For Leaky Headers and rating them. It was a difficult job to list only ten products for Header Gasket For Leaky Headers where thousands of them available online. I hope it will help you to take final decision for Best Header Gasket For Leaky Headers.

Best Header Gasket For Leaky Headers
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
13" 3 Bolt MLSG High Temp Exhaust Gasket w/SS Fire Ring (Qty 2)9.8Check it on Amazon
2Michigan Motorsports LS Multi Layer MLS Header Manifold Exhaust Gasket Like 12617944 LS1 LS2 LS3 LS6 LQ4 LQ9 4.8 5.3 5.7 6.0 6.29.8Check it on Amazon
3Remflex 6004 Exhaust Gasket for Mopar V8 Engine9.6Check it on Amazon
4Hedman 27520 Flange Gaskets - Set of 29.2Check it on Amazon
5DEPEPE 30 Pcs 40 Pin 2.54mm Male and Female Pin Headers for Arduino Prototype Shield9Check it on Amazon
6DNA Motoring GKTSET-FRS Aluminum Exhaust Manifold Header Gasket Set Replacement8.8Check it on Amazon
7MAHLE Original MS16124 Gasket (Packaging may vary)8.8Check it on Amazon
8Hedman Hedders 27500 Exhaust Header Gasket Round Exhaust Header Gasket8.8Check it on Amazon
9Remflex 3010 Exhaust Gasket for Ford V8 Engine8.8Check it on Amazon
10Fel-Pro MS94054 Exhaust Manifold Gasket Set8.6Check it on Amazon

Comparison Chart for Best Header Gasket For Leaky Headers

42545 reviews were considered when writing our recommendations for the Header Gasket For Leaky Headers in this article.

Table Of Content:

1. 3″ 3 Bolt MLSG High Temp Exhaust Gasket w/SS Fire Ring (Qty 2)

  • Bolt To Bolt Measurement: 3.5″ / 89mm

2. Michigan Motorsports LS Multi Layer MLS Header Manifold Exhaust Gasket Like 12617944 LS1 LS2 LS3 LS6 LQ4 LQ9 4.8 5.3 5.7 6.0 6.2

  • LS Multi Layer Exhaust Gasket Like 12617944 LS1 LS2 LS6 LQ4 LQ9 4.8 5.3 5.7 6.0 A Pair of Gaskets
  • These exhaust manifold gaskets will provide a leak-free seal when installing your exhaust manifolds.
  • QTY 2- LS Multi Layer Exhaust Gasket Like 12617944
  • LS1 LS2 LS6 4.8 5.3 5.7 6.0
  • Fits Gen III/Gen IV

3. Remflex 6004 Exhaust Gasket for Mopar V8 Engine

  • Remflex’s unique flexible graphite material has been proven for more than 30 years
  • 1-7/32 inch width x 1-25/32 inch height Square End Ports; Mopar V8 – Magnum 318 (’92-’02), 360 (’93+), Square End Ports, Manifold or Headers, 2/Set.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Fit type: Universal Fit

4. Hedman 27520 Flange Gaskets – Set of 2

  • Package Dimensions: 0.8 H x 58.0 L x 12.2 W (centimeters)
  • Fit type: Vehicle Specific
  • Country of Origin : United States
  • Package Weight: 0.308 pounds

5. DEPEPE 30 Pcs 40 Pin 2.54mm Male and Female Pin Headers for Arduino Prototype Shield

  • Come with 15pcs male headers and 15pcs female headers
  • Pitch: 2.54mm, number of pins: 40pin
  • Made of copper and plastic
  • Type of row: single row, type of pin: straight
  • Great tools for arduino prototype shield

6. DNA Motoring GKTSET-FRS Aluminum Exhaust Manifold Header Gasket Set Replacement

  • Aluminum Reinforced Graphite Exhaust Manifold Gasket
  • Complete Hardware Kit for Installing Aftermarket Header to your Vehicle
  • Great for Replacement of Missing or Damaged Gaskets
  • 100% Brand New
  • Installation Instruction is NOT Included

7. MAHLE Original MS16124 Gasket (Packaging may vary)

  • All MAHLE Original gaskets meet or exceed the original equipment specifications providing the finest sealing products available.
  • MAHLE Original gaskets utilizes OE equivalent or better materials in all our gaskets
  • Exhaust manifold gasket set contains all gaskets required.
  • The contents of MAHLE Original gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package.

8. Hedman Hedders 27500 Exhaust Header Gasket Round Exhaust Header Gasket

  • Package Weight: 0.139 kg
  • Product Type: Auto Part
  • Package Quantity: 1
  • Country Of Origin: United States

9. Remflex 3010 Exhaust Gasket for Ford V8 Engine

  • 1-1/4 inch width x 2-3/32 inch height Oval Port; Ford V8 – 429 (’68-’73), 460 (’68-’87), (Except Cobra Jet) Oval Port, For Carbureted Engines, 2/Set.
  • Not for fuel injected engines
  • Manifold or headers
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

10. Fel-Pro MS94054 Exhaust Manifold Gasket Set

  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Fit type: Vehicle Specific

How To Choose The Best Header Gasket For Leaky Headers

Does the thought of finding a great Header Gasket For Leaky Headers stress you out? Has your mind been juggling between choices when it comes to buying Header Gasket For Leaky Headers in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Header Gasket For Leaky Headers for themselves. We understand the stress associated with the buying process!

Since you’re here, you are obviously curious about Header Gasket For Leaky Headers. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.

There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.

But that’s not always easy, right? That's why we've taken time to compile a list of the best Header Gasket For Leaky Headers in today's market, on your behalf, so that there will be no more worries for you.

How did we come up with the list, you ask? How did we create this buying guide?

  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Header Gasket For Leaky Headers currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-

  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.


Top Header Gasket For Leaky Headers brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.

  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Header Gasket For Leaky Headers based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Header Gasket For Leaky Headers before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Header Gasket For Leaky Headers they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Header Gasket For Leaky Headers, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Header Gasket For Leaky Headers before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Header Gasket For Leaky Headers will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Header Gasket For Leaky Headers if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Header Gasket For Leaky Headers on the market, the products that got mostly negative ratings get filtered and discarded.
These are the criteria we have chosen our Header Gasket For Leaky Headers on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.

Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Header Gasket For Leaky Headers featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Comment