Last Update:
Our team studied on 60763 reviews available online for Solder Wick, chose the finest ones and prepared Solder Wick Reviews for you. It was very difficult to shortlist the ideal Solder Wick from thousands of products online. However, We tried to make sure that you get only the Best Solder Wick from our suggestions. Check our listings-:
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
No | Product | Score | Action |
---|---|---|---|
1 | Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll and Disassemble Electrical Components | 9.2 | Check it on Amazon |
2 | TOWOT No-Clean Solder Wick | 9.2 | Check it on Amazon |
3 | NTE Electronics SW02-10 No-Clean Solder Wick | 9 | Check it on Amazon |
4 | MG Chemicals 425-NS No Clean Super Wick Desoldering Braid | 9 | Check it on Amazon |
5 | MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool | 8.8 | Check it on Amazon |
6 | 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks | 8.8 | Check it on Amazon |
7 | Tabiger Solder Wick & Desoldering Pump | 8.8 | Check it on Amazon |
8 | AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool | 8.6 | Check it on Amazon |
9 | Soldering Iron Kit - Soldering Iron 60 W Adjustable Temperature | 8.6 | Check it on Amazon |
10 | Herain No-Clean Solder Wick | 8.2 | Check it on Amazon |
Comparison Chart for Best Solder Wick
60763 reviews were considered when writing our recommendations for the Solder Wick in this article.
Table Of Content:
- Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder...
- TOWOT No-Clean Solder Wick, 10ft Length Desoldering Wick Used to Remove the Solder and Disassemble Electrical...
- NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length
- MG Chemicals 425-NS No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length
- MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width...
- 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length...
- Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid - Desoldering...
- AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick with Flux Desoldering Vacuum Pump Solder Removal...
- Soldering Iron Kit Soldering Iron 60 W Adjustable Temperature, Solder Wire, Tweezers, Soldering Iron Stand...
- Herain No-Clean Solder Wick, Desoldering Braided Wicks with Flux, Desoldering Wicks Removal Tool Solder...
1. Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll and Disassemble Electrical Components
- The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.
- This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
- The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
2. TOWOT No-Clean Solder Wick
- Quality materials:The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Warranty :If you have any questions, please feel free to contact us at any time. Thank you!
3. NTE Electronics SW02-10 No-Clean Solder Wick
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.
- Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
- 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Available with standard or anti-static bobbins
4. MG Chemicals 425-NS No Clean Super Wick Desoldering Braid
- Conforms to MIL-F-14256E RMA flux and J-STD-004
- High purity, oxide-free copper
- ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
- Environmentally and PCB safe residues
- NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
5. MIKIMIQI Solder Wicks
- Package Include – You will get 1 pack No-Clean Solder Braided Wicks.
- Appropriate Size – The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft.
- Premium Material – The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.
- Solder Braided Wicks – The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.
- Applicable Occasions – The no-clean desoldering wicks are suitable for industry welding, labs work or home work.
6. 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks
- What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.
- No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards.
- Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
- Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
- Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
7. Tabiger Solder Wick & Desoldering Pump
- One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and “vacuum” button, which make the sucking power awesome.
- Desoldering Wick with copper braid】 2pcs solder braid with the size 2.
- ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- 3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
8. AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux – Desoldering Vacuum Pump Solder Removal Tool
- High efficiency solder sucker – the desoldering pump designed with double ring and “vacuum” open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.
- Desoldering braid wick with rosin – 6 pieces copper solder braid in 3 size, width 2.
- High quality material – the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable.
- Wide application – correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering.
- 7-in-1 solder removal tool – 1pcs solder sucker and 6pcs solder wicks in 3 size
9. Soldering Iron Kit – Soldering Iron 60 W Adjustable Temperature
- Soldering Iron Kit for many applications – necessary tools for soldering projects, home DIY fixing jobs, electrical, electronics and appliance repairs, circuit board welding, for home DIY hobbyist in crafts and jewelry making and many more uses.
- Premium Quality Components with safety features – high quality soldering iron, stand and all other accessories; soldering iron with adjustable temperature knob (200℃ – 450℃), 5pcs replaceable tips, heat-resistant cap and grip for maximum protection.
- Bonus Accessories – more than 15 extra items such as desoldering pump/solder sucker, tin wire solder tube, tweezers, mini wire stripper, mini screwdrivers, mini PCB, heat shrink tubes and more plus a downloadable ebook.
- Durable and Convenient Carry Bag – assorted tools come handy in a durable easy-to-carry PU bag; keeps all the components organized, easy to carry, store and transport anywhere; everything you wanted in a home DIY do-it-yourself package.
- Satisfaction Guarantee – every purchase is backed by the manufacturer’s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction.
10. Herain No-Clean Solder Wick
- High-quality materials: The desoldering wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.
- Geometric braid design: The solder wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.
- Widely used: No-clean desoldering wick is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters.
- Easy to use: The desoldering braid wick is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder.
- Ingenuity quality: 1 piece of no-clean solder braided wick (0.
How To Choose The Best Solder WickDoes the thought of finding a great Solder Wick stress you out? Has your mind been juggling between choices when it comes to buying Solder Wick in general, specifically regarding which model to choose?If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Solder Wick for themselves. We understand the stress associated with the buying process!Since you’re here, you are obviously curious about Solder Wick. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.But that’s not always easy, right? That's why we've taken time to compile a list of the best Solder Wick in today's market, on your behalf, so that there will be no more worries for you.How did we come up with the list, you ask? How did we create this buying guide?
- First, our algorithms collected as much information available about these products from trusted sources.
- We employed both Artificial Intelligence and large data volume to validate all collected information.
- Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Solder Wick currently on the market!
- Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
- Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Solder Wick based on that.
- Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
- Customer Ratings: The hundreds of customers using the Solder Wick before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
- Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Solder Wick they used.
- Seller Rank: Now, this is interesting! You don’t just need a good Solder Wick, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
- Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Solder Wick before putting them on the list.
- Durability: Durability and reliability go hand to hand. A robust and durable Solder Wick will serve you for months and years to come.
- Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Solder Wick if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
- Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Solder Wick on the market, the products that got mostly negative ratings get filtered and discarded.