Top 10 Best Intake Manifold For Mopar 360 Based On Customer Ratings

by
Last Update:

Our team studied on 54539 reviews available online for Intake Manifold For Mopar 360, chose the finest ones and prepared Intake Manifold For Mopar 360 Reviews for you. It was very difficult to shortlist the ideal Intake Manifold For Mopar 360 from thousands of products online. However, We tried to make sure that you get only the Best Intake Manifold For Mopar 360 from our suggestions. Check our listings-:

Best Intake Manifold For Mopar 360
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1Edelbrock 7276 Intake Gasket Set - SBM9.8Check it on Amazon
2Edelbrock 2176 Performer Aluminum Intake Manifold9.6Check it on Amazon
3NIBBI Racing Parts Replacement High Performance GY6 Intake Manifold Intake Manifold Boot for GY6 Engine Scooter 125CC 150CC9.4Check it on Amazon
4A-Team Performance - Complete HEI Distributor 65K Coil - Compatible with Mopar Chrysler Dodge Plymouth V8 Engines 273 318 340 360 One-Wire Installation Red Cap9.2Check it on Amazon
5FEL-PRO 1213 Intake Manifold Gasket Set9Check it on Amazon
6Edelbrock 2601 Performer Air-Gap Aluminum Intake Manifold9Check it on Amazon
7Edelbrock 7501 Performer RPM Air-Gap Intake Manifold8.6Check it on Amazon
8BOXI Upper Intake Manifold For 93-95 Buick Regal LeSabre Park Avenue Chevrolet Lumina APV Pontiac Trans Sport Bonneville Oldsmobile V6 3.8L 615-179 171130448.4Check it on Amazon
9Mopar 77070044AC Cold Air Intake8.4Check it on Amazon
10ALLOYBOLTZ - STAINLESS STEEL ENGINE HEX BOLT KIT COMPATIBLE WITH THE SMALL BLOCK MOPAR SBM 273 318 340 360 ENGINES8.2Check it on Amazon

Comparison Chart for Best Intake Manifold For Mopar 360

54539 number of user reviews were available online, which we scanned to find the Intake Manifold For Mopar 360. Hopefully, our experts suggestions available in this article will help you find your ideal choice.

Table Of Content:

1. Edelbrock 7276 Intake Gasket Set – SBM

Edelbrock 7276 Intake Gasket Set - SBMCheck it on Amazon
  • Package Dimensions: 60.96 H x 0.508 L x 11.43 W (centimeters)
  • Fit type: Vehicle Specific
  • Country of Origin : United States
  • Package Weight: 0.136 kilograms

2. Edelbrock 2176 Performer Aluminum Intake Manifold

Edelbrock 2176 Performer Aluminum Intake ManifoldCheck it on Amazon
  • Dual-plane, low-rise intake manifolds with a 180 degree firing order
  • Boosts torque from off-idle to 5, 500 RPM
  • Available with non-EGR style
  • Delivers improved throttle response over stock intakes
  • Comes with a natural finish

3. NIBBI Racing Parts Replacement High Performance GY6 Intake Manifold Intake Manifold Boot for GY6 Engine Scooter 125CC 150CC

NIBBI Racing Parts Replacement High Performance GY6 Intake Manifold Intake Manifold Boot for GY6 Engine Scooter 125CC 150CCCheck it on Amazon
  • Fit for GY6 125CC 150CC Scooter
  • 33mm rubber fit for PE24mm 26mm 28mm 30mm PWK24mm 26mm 28mm Carburetor
  • Bolt CTC: 45mm
  • Opening diameter:22mm(7/8)the second picture show

4. A-Team Performance – Complete HEI Distributor 65K Coil – Compatible with Mopar Chrysler Dodge Plymouth V8 Engines 273 318 340 360 One-Wire Installation Red Cap

A-Team Performance - Complete HEI Distributor 65K Coil - Compatible with Mopar Chrysler Dodge Plymouth V8 Engines 273 318 340 360 One-Wire Installation Red CapCheck it on Amazon
  • Complete HEI Distributor 65K Coil – One Wire Installation, Red cap
  • Compatible with Mopar Chrysler Dodge Plymouth V8 Engines 273 318 340 360
  • Heavy Duty – with high grade hardened steel, utilizing the 4-pin ignition
  • OE+ Durability – manufactured by certified OE distributor manufacturer; CNC-MACHINED – and Polished Aluminum shaft, and a chrome moly gear.
  • Coil Spark of 7,500 RPM – with high voltage of up to 65,000

5. FEL-PRO 1213 Intake Manifold Gasket Set

FEL-PRO 1213 Intake Manifold Gasket SetCheck it on Amazon
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair.
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development.
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road.
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted.

6. Edelbrock 2601 Performer Air-Gap Aluminum Intake Manifold

Edelbrock 2601 Performer Air-Gap Aluminum Intake Manifold, Multi, One SizeCheck it on Amazon
  • Patented runner tuning and a 180 degree firing order
  • Fits spread-bore or square-bore carburetors
  • Features the air-gap design for ultimate street performance
  • Will not fit under stock Corvette hood
  • No provision for exhaust heated chokes or exhaust crossover
  • Fit type: Vehicle Specific

7. Edelbrock 7501 Performer RPM Air-Gap Intake Manifold

Edelbrock 7501 Performer RPM Air-Gap Intake ManifoldCheck it on Amazon
  • Dual plane intake style with an Air-Gap
  • Air-Gap design separates the runner from the heat of the lifter-valley cover
  • Temperature sending unit boss clears all water necks
  • No provision for exhaust heated chokes and no exhaust cross-over
  • Will not fit under stock corvette hood and is meant for square bore carburetors

8. BOXI Upper Intake Manifold For 93-95 Buick Regal LeSabre Park Avenue Chevrolet Lumina APV Pontiac Trans Sport Bonneville Oldsmobile V6 3.8L 615-179 17113044

BOXI Upper Intake Manifold For 93-95 Buick Regal LeSabre Park Avenue Chevrolet Lumina APV Pontiac Trans Sport Bonneville Oldsmobile V6 3.8L 615-179 17113044Check it on Amazon
  • DIRECT REPLACEMENT: This BOXI upper intake manifold is specifically engineered to match the design and performance of the original intake manifold on select.
  • PARTS INFORMATION – Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number.
  • GREATER DURABILITY: Re-engineered with heat-resistant polymers to reduce warping and coolant leaks.
  • REINFORCED MATERIALS: Features an aluminum coolant crossover that reduces corrosion and vibration
  • IMPORTANT*** TO VERIFY FITMENT. Please See Product Description

9. Mopar 77070044AC Cold Air Intake

Mopar 77070044AC Cold Air IntakeCheck it on Amazon
  • This bolt-on system is designed to allow cooler outside air in through a directional cone filter and funnel it directly into the intake manifold.
  • This kit provides noticeable horsepower and torque gains under varying atmospheric conditions
  • Includes blue filter and Mopar logo on intake tube

10. ALLOYBOLTZ – STAINLESS STEEL ENGINE HEX BOLT KIT COMPATIBLE WITH THE SMALL BLOCK MOPAR SBM 273 318 340 360 ENGINES

ALLOYBOLTZ - STAINLESS STEEL ENGINE HEX BOLT KIT COMPATIBLE WITH THE SMALL BLOCK MOPAR SBM 273 318 340 360 ENGINESCheck it on Amazon
  • Here’s a great way to give a Small Block Engine a new look with our 218 Piece Stainless Steel Hex Bolt kit!! Our special intake washers are 1/8 thick.
  • This Bolt Kit is compatible with all 273, 318, 340, and 360 Engines.
  • Kit comes with components for the Intake Manifold- Timing Cover- Water Pump- Oil Pan- Crank Pulley- Fan Pulley- Thermostat Housing- Distributor- Coil Bracket- Fuel Pump- Valve Covers- Headers- Carb Stud Kit.
  • The carb stud kit is compatible with Carter, Edelbrock, or Holley Carbs.
  • Header Bolts (5/16-18 x 1 Allen Bolts) And Our Special Small OD Header Washers Are Included With Each Kit! These washers are designed to Clear Large Tube Headers.

Intake Manifold For Mopar 360 Buying Guide


Does the thought of finding a great Intake Manifold For Mopar 360 stress you out? Has your mind been juggling between choices when it comes to buying Intake Manifold For Mopar 360 in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Intake Manifold For Mopar 360 for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Intake Manifold For Mopar 360 Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Intake Manifold For Mopar 360 in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Intake Manifold For Mopar 360 currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Intake Manifold For Mopar 360 brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Intake Manifold For Mopar 360 based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Intake Manifold For Mopar 360 before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Intake Manifold For Mopar 360 they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Intake Manifold For Mopar 360, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Intake Manifold For Mopar 360 before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Intake Manifold For Mopar 360 will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Intake Manifold For Mopar 360 if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Intake Manifold For Mopar 360 on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Intake Manifold For Mopar 360 on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Intake Manifold For Mopar 360 featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Comment